Contract Address Details

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (governance/TimelockController.sol)

pragma solidity ^0.8.20;

import {AccessControl} from "../access/AccessControl.sol";
import {ERC721Holder} from "../token/ERC721/utils/ERC721Holder.sol";
import {ERC1155Holder} from "../token/ERC1155/utils/ERC1155Holder.sol";
import {Address} from "../utils/Address.sol";

/**
 * @dev Contract module which acts as a timelocked controller. When set as the
 * owner of an `Ownable` smart contract, it enforces a timelock on all
 * `onlyOwner` maintenance operations. This gives time for users of the
 * controlled contract to exit before a potentially dangerous maintenance
 * operation is applied.
 *
 * By default, this contract is self administered, meaning administration tasks
 * have to go through the timelock process. The proposer (resp executor) role
 * is in charge of proposing (resp executing) operations. A common use case is
 * to position this {TimelockController} as the owner of a smart contract, with
 * a multisig or a DAO as the sole proposer.
 */
contract TimelockController is AccessControl, ERC721Holder, ERC1155Holder {
    bytes32 public constant PROPOSER_ROLE = keccak256("PROPOSER_ROLE");
    bytes32 public constant EXECUTOR_ROLE = keccak256("EXECUTOR_ROLE");
    bytes32 public constant CANCELLER_ROLE = keccak256("CANCELLER_ROLE");
    uint256 internal constant _DONE_TIMESTAMP = uint256(1);

    mapping(bytes32 id => uint256) private _timestamps;
    uint256 private _minDelay;

    enum OperationState {
        Unset,
        Waiting,
        Ready,
        Done
    }

    /**
     * @dev Mismatch between the parameters length for an operation call.
     */
    error TimelockInvalidOperationLength(uint256 targets, uint256 payloads, uint256 values);

    /**
     * @dev The schedule operation doesn't meet the minimum delay.
     */
    error TimelockInsufficientDelay(uint256 delay, uint256 minDelay);

    /**
     * @dev The current state of an operation is not as required.
     * The `expectedStates` is a bitmap with the bits enabled for each OperationState enum position
     * counting from right to left.
     *
     * See {_encodeStateBitmap}.
     */
    error TimelockUnexpectedOperationState(bytes32 operationId, bytes32 expectedStates);

    /**
     * @dev The predecessor to an operation not yet done.
     */
    error TimelockUnexecutedPredecessor(bytes32 predecessorId);

    /**
     * @dev The caller account is not authorized.
     */
    error TimelockUnauthorizedCaller(address caller);

    /**
     * @dev Emitted when a call is scheduled as part of operation `id`.
     */
    event CallScheduled(
        bytes32 indexed id,
        uint256 indexed index,
        address target,
        uint256 value,
        bytes data,
        bytes32 predecessor,
        uint256 delay
    );

    /**
     * @dev Emitted when a call is performed as part of operation `id`.
     */
    event CallExecuted(bytes32 indexed id, uint256 indexed index, address target, uint256 value, bytes data);

    /**
     * @dev Emitted when new proposal is scheduled with non-zero salt.
     */
    event CallSalt(bytes32 indexed id, bytes32 salt);

    /**
     * @dev Emitted when operation `id` is cancelled.
     */
    event Cancelled(bytes32 indexed id);

    /**
     * @dev Emitted when the minimum delay for future operations is modified.
     */
    event MinDelayChange(uint256 oldDuration, uint256 newDuration);

    /**
     * @dev Initializes the contract with the following parameters:
     *
     * - `minDelay`: initial minimum delay in seconds for operations
     * - `proposers`: accounts to be granted proposer and canceller roles
     * - `executors`: accounts to be granted executor role
     * - `admin`: optional account to be granted admin role; disable with zero address
     *
     * IMPORTANT: The optional admin can aid with initial configuration of roles after deployment
     * without being subject to delay, but this role should be subsequently renounced in favor of
     * administration through timelocked proposals. Previous versions of this contract would assign
     * this admin to the deployer automatically and should be renounced as well.
     */
    constructor(uint256 minDelay, address[] memory proposers, address[] memory executors, address admin) {
        // self administration
        _grantRole(DEFAULT_ADMIN_ROLE, address(this));

        // optional admin
        if (admin != address(0)) {
            _grantRole(DEFAULT_ADMIN_ROLE, admin);
        }

        // register proposers and cancellers
        for (uint256 i = 0; i < proposers.length; ++i) {
            _grantRole(PROPOSER_ROLE, proposers[i]);
            _grantRole(CANCELLER_ROLE, proposers[i]);
        }

        // register executors
        for (uint256 i = 0; i < executors.length; ++i) {
            _grantRole(EXECUTOR_ROLE, executors[i]);
        }

        _minDelay = minDelay;
        emit MinDelayChange(0, minDelay);
    }

    /**
     * @dev Modifier to make a function callable only by a certain role. In
     * addition to checking the sender's role, `address(0)` 's role is also
     * considered. Granting a role to `address(0)` is equivalent to enabling
     * this role for everyone.
     */
    modifier onlyRoleOrOpenRole(bytes32 role) {
        if (!hasRole(role, address(0))) {
            _checkRole(role, _msgSender());
        }
        _;
    }

    /**
     * @dev Contract might receive/hold ETH as part of the maintenance process.
     */
    receive() external payable {}

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(
        bytes4 interfaceId
    ) public view virtual override(AccessControl, ERC1155Holder) returns (bool) {
        return super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns whether an id corresponds to a registered operation. This
     * includes both Waiting, Ready, and Done operations.
     */
    function isOperation(bytes32 id) public view returns (bool) {
        return getOperationState(id) != OperationState.Unset;
    }

    /**
     * @dev Returns whether an operation is pending or not. Note that a "pending" operation may also be "ready".
     */
    function isOperationPending(bytes32 id) public view returns (bool) {
        OperationState state = getOperationState(id);
        return state == OperationState.Waiting || state == OperationState.Ready;
    }

    /**
     * @dev Returns whether an operation is ready for execution. Note that a "ready" operation is also "pending".
     */
    function isOperationReady(bytes32 id) public view returns (bool) {
        return getOperationState(id) == OperationState.Ready;
    }

    /**
     * @dev Returns whether an operation is done or not.
     */
    function isOperationDone(bytes32 id) public view returns (bool) {
        return getOperationState(id) == OperationState.Done;
    }

    /**
     * @dev Returns the timestamp at which an operation becomes ready (0 for
     * unset operations, 1 for done operations).
     */
    function getTimestamp(bytes32 id) public view virtual returns (uint256) {
        return _timestamps[id];
    }

    /**
     * @dev Returns operation state.
     */
    function getOperationState(bytes32 id) public view virtual returns (OperationState) {
        uint256 timestamp = getTimestamp(id);
        if (timestamp == 0) {
            return OperationState.Unset;
        } else if (timestamp == _DONE_TIMESTAMP) {
            return OperationState.Done;
        } else if (timestamp > block.timestamp) {
            return OperationState.Waiting;
        } else {
            return OperationState.Ready;
        }
    }

    /**
     * @dev Returns the minimum delay in seconds for an operation to become valid.
     *
     * This value can be changed by executing an operation that calls `updateDelay`.
     */
    function getMinDelay() public view virtual returns (uint256) {
        return _minDelay;
    }

    /**
     * @dev Returns the identifier of an operation containing a single
     * transaction.
     */
    function hashOperation(
        address target,
        uint256 value,
        bytes calldata data,
        bytes32 predecessor,
        bytes32 salt
    ) public pure virtual returns (bytes32) {
        return keccak256(abi.encode(target, value, data, predecessor, salt));
    }

    /**
     * @dev Returns the identifier of an operation containing a batch of
     * transactions.
     */
    function hashOperationBatch(
        address[] calldata targets,
        uint256[] calldata values,
        bytes[] calldata payloads,
        bytes32 predecessor,
        bytes32 salt
    ) public pure virtual returns (bytes32) {
        return keccak256(abi.encode(targets, values, payloads, predecessor, salt));
    }

    /**
     * @dev Schedule an operation containing a single transaction.
     *
     * Emits {CallSalt} if salt is nonzero, and {CallScheduled}.
     *
     * Requirements:
     *
     * - the caller must have the 'proposer' role.
     */
    function schedule(
        address target,
        uint256 value,
        bytes calldata data,
        bytes32 predecessor,
        bytes32 salt,
        uint256 delay
    ) public virtual onlyRole(PROPOSER_ROLE) {
        bytes32 id = hashOperation(target, value, data, predecessor, salt);
        _schedule(id, delay);
        emit CallScheduled(id, 0, target, value, data, predecessor, delay);
        if (salt != bytes32(0)) {
            emit CallSalt(id, salt);
        }
    }

    /**
     * @dev Schedule an operation containing a batch of transactions.
     *
     * Emits {CallSalt} if salt is nonzero, and one {CallScheduled} event per transaction in the batch.
     *
     * Requirements:
     *
     * - the caller must have the 'proposer' role.
     */
    function scheduleBatch(
        address[] calldata targets,
        uint256[] calldata values,
        bytes[] calldata payloads,
        bytes32 predecessor,
        bytes32 salt,
        uint256 delay
    ) public virtual onlyRole(PROPOSER_ROLE) {
        if (targets.length != values.length || targets.length != payloads.length) {
            revert TimelockInvalidOperationLength(targets.length, payloads.length, values.length);
        }

        bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);
        _schedule(id, delay);
        for (uint256 i = 0; i < targets.length; ++i) {
            emit CallScheduled(id, i, targets[i], values[i], payloads[i], predecessor, delay);
        }
        if (salt != bytes32(0)) {
            emit CallSalt(id, salt);
        }
    }

    /**
     * @dev Schedule an operation that is to become valid after a given delay.
     */
    function _schedule(bytes32 id, uint256 delay) private {
        if (isOperation(id)) {
            revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Unset));
        }
        uint256 minDelay = getMinDelay();
        if (delay < minDelay) {
            revert TimelockInsufficientDelay(delay, minDelay);
        }
        _timestamps[id] = block.timestamp + delay;
    }

    /**
     * @dev Cancel an operation.
     *
     * Requirements:
     *
     * - the caller must have the 'canceller' role.
     */
    function cancel(bytes32 id) public virtual onlyRole(CANCELLER_ROLE) {
        if (!isOperationPending(id)) {
            revert TimelockUnexpectedOperationState(
                id,
                _encodeStateBitmap(OperationState.Waiting) | _encodeStateBitmap(OperationState.Ready)
            );
        }
        delete _timestamps[id];

        emit Cancelled(id);
    }

    /**
     * @dev Execute an (ready) operation containing a single transaction.
     *
     * Emits a {CallExecuted} event.
     *
     * Requirements:
     *
     * - the caller must have the 'executor' role.
     */
    // This function can reenter, but it doesn't pose a risk because _afterCall checks that the proposal is pending,
    // thus any modifications to the operation during reentrancy should be caught.
    // slither-disable-next-line reentrancy-eth
    function execute(
        address target,
        uint256 value,
        bytes calldata payload,
        bytes32 predecessor,
        bytes32 salt
    ) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
        bytes32 id = hashOperation(target, value, payload, predecessor, salt);

        _beforeCall(id, predecessor);
        _execute(target, value, payload);
        emit CallExecuted(id, 0, target, value, payload);
        _afterCall(id);
    }

    /**
     * @dev Execute an (ready) operation containing a batch of transactions.
     *
     * Emits one {CallExecuted} event per transaction in the batch.
     *
     * Requirements:
     *
     * - the caller must have the 'executor' role.
     */
    // This function can reenter, but it doesn't pose a risk because _afterCall checks that the proposal is pending,
    // thus any modifications to the operation during reentrancy should be caught.
    // slither-disable-next-line reentrancy-eth
    function executeBatch(
        address[] calldata targets,
        uint256[] calldata values,
        bytes[] calldata payloads,
        bytes32 predecessor,
        bytes32 salt
    ) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
        if (targets.length != values.length || targets.length != payloads.length) {
            revert TimelockInvalidOperationLength(targets.length, payloads.length, values.length);
        }

        bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);

        _beforeCall(id, predecessor);
        for (uint256 i = 0; i < targets.length; ++i) {
            address target = targets[i];
            uint256 value = values[i];
            bytes calldata payload = payloads[i];
            _execute(target, value, payload);
            emit CallExecuted(id, i, target, value, payload);
        }
        _afterCall(id);
    }

    /**
     * @dev Execute an operation's call.
     */
    function _execute(address target, uint256 value, bytes calldata data) internal virtual {
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        Address.verifyCallResult(success, returndata);
    }

    /**
     * @dev Checks before execution of an operation's calls.
     */
    function _beforeCall(bytes32 id, bytes32 predecessor) private view {
        if (!isOperationReady(id)) {
            revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Ready));
        }
        if (predecessor != bytes32(0) && !isOperationDone(predecessor)) {
            revert TimelockUnexecutedPredecessor(predecessor);
        }
    }

    /**
     * @dev Checks after execution of an operation's calls.
     */
    function _afterCall(bytes32 id) private {
        if (!isOperationReady(id)) {
            revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Ready));
        }
        _timestamps[id] = _DONE_TIMESTAMP;
    }

    /**
     * @dev Changes the minimum timelock duration for future operations.
     *
     * Emits a {MinDelayChange} event.
     *
     * Requirements:
     *
     * - the caller must be the timelock itself. This can only be achieved by scheduling and later executing
     * an operation where the timelock is the target and the data is the ABI-encoded call to this function.
     */
    function updateDelay(uint256 newDelay) external virtual {
        address sender = _msgSender();
        if (sender != address(this)) {
            revert TimelockUnauthorizedCaller(sender);
        }
        emit MinDelayChange(_minDelay, newDelay);
        _minDelay = newDelay;
    }

    /**
     * @dev Encodes a `OperationState` into a `bytes32` representation where each bit enabled corresponds to
     * the underlying position in the `OperationState` enum. For example:
     *
     * 0x000...1000
     *   ^^^^^^----- ...
     *         ^---- Done
     *          ^--- Ready
     *           ^-- Waiting
     *            ^- Unset
     */
    function _encodeStateBitmap(OperationState operationState) internal pure returns (bytes32) {
        return bytes32(1 << uint8(operationState));
    }
}
        

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "./IAccessControl.sol";
import {Context} from "../utils/Context.sol";
import {ERC165} from "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    mapping(bytes32 role => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        return _roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        if (!hasRole(role, account)) {
            _roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        if (hasRole(role, account)) {
            _roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC-1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC-1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of common custom errors used in multiple contracts
 *
 * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
 * It is recommended to avoid relying on the error API for critical functionality.
 *
 * _Available since v5.1._
 */
library Errors {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error InsufficientBalance(uint256 balance, uint256 needed);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedCall();

    /**
     * @dev The deployment failed.
     */
    error FailedDeployment();

    /**
     * @dev A necessary precompile is missing.
     */
    error MissingPrecompile(address);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC1155/utils/ERC1155Holder.sol)

pragma solidity ^0.8.20;

import {IERC165, ERC165} from "../../../utils/introspection/ERC165.sol";
import {IERC1155Receiver} from "../IERC1155Receiver.sol";

/**
 * @dev Simple implementation of `IERC1155Receiver` that will allow a contract to hold ERC-1155 tokens.
 *
 * IMPORTANT: When inheriting this contract, you must include a way to use the received tokens, otherwise they will be
 * stuck.
 */
abstract contract ERC1155Holder is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }

    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155Received.selector;
    }

    function onERC1155BatchReceived(
        address,
        address,
        uint256[] memory,
        uint256[] memory,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155BatchReceived.selector;
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC-721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC-721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/utils/ERC721Holder.sol)

pragma solidity ^0.8.20;

import {IERC721Receiver} from "../IERC721Receiver.sol";

/**
 * @dev Implementation of the {IERC721Receiver} interface.
 *
 * Accepts all token transfers.
 * Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or
 * {IERC721-setApprovalForAll}.
 */
abstract contract ERC721Holder is IERC721Receiver {
    /**
     * @dev See {IERC721Receiver-onERC721Received}.
     *
     * Always returns `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(address, address, uint256, bytes memory) public virtual returns (bytes4) {
        return this.onERC721Received.selector;
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Address.sol)

pragma solidity ^0.8.20;

import {Errors} from "./Errors.sol";

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert Errors.InsufficientBalance(address(this).balance, amount);
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert Errors.FailedCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {Errors.FailedCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert Errors.InsufficientBalance(address(this).balance, value);
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
     * of an unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {Errors.FailedCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            assembly ("memory-safe") {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert Errors.FailedCall();
        }
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC-165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).
     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}